产品咨询热线:
                +86
53283131798
搜索
产品详情
AJMF-365/368/468封边机 双修+仿形+预铣
分享到:

AJMF-365/368/468封边机 双修+仿形+预铣

销量:39
品牌: 奥佳
邮箱: kyrie@aojiamachinery.com
邮箱: ringolin@aojiamachinery.com
产品详情

木工封边机


主要技术参数

Main Technical Parameters

木工封边机参数


配置表

Configuration table

458453.jpg


功能特点

Features

11b.jpg

前后齐头由前齐头和后齐头组成,由台湾亚德客电磁阀控制,台湾亚德客气缸,并有特有的齐头撞板保护功能,由特的锯片切断,加强了齐头的稳定性。

Controlled by Taiwan Yadeke solenoid valves, the front and rear end trimming is equipped with Taiwan Yadeke cylinders and a unique anticollision device. Boards are cut off by tailor-made saw blades to strengthen the stability of trimming.


粗修刀为15°平刀,为精修留出40-50丝的余量,采用靠模自动跟踪和高频高速电机实现快速切割。精修刀为R2斜修刀,为刮边留出5-6丝的余量,采用靠模自动跟踪和高频高速电机实现快速切割,R2斜修刀修出弧度。

The rough finish knife is a 15-degree flat knife, leaving a margin of 40-50 dmm for fine finish. By using automatic filleting and a high-frequency and high-speed motor, fast cutting can be ensured. The fine finish knife is an oblique R2, leaving a margin of 5-6 dmm for scraping. By using automatic filleting and a high-frequency and high-speed motor, the oblique R2 can shape curves.


仿形刮边,用于消除修边非直线运动的切割过程所引起次波浪痕迹,使板材上下部分更加光滑整洁,同时刮边还可以调整圆弧的大小,让封边效果更完美。

Imitation scraping is used to eliminate the wave traces caused by non-straight motion of trimming, so that the upper and lower parts of the board can be smoother while the curvature can also be adjusted to make the sealing effect perfect.


微信图片_202110171616.jpg


微信图片_20211017161602.jpg


微信图片_20211017161923.jpg






关于我们

青岛奥佳机械科技有限公司,是一家专业制造木工机械设备的企业,

位于专业木工机械生产加工基地--青岛西海岸新区,紧邻集装箱港

口,地理位置优越,交通便利。
联系我们

联系邮箱:kyrie@aojiamachinery.com

                 ringolin@aojiamachinery.com

联系电话:+8618561470917
联系地址:山东省青岛市西海岸新区王台镇孟山路2号