主要技术参数
Main Technical Parameters
配置表
Configuration table
功能特点
Features
前后齐头由前齐头和后齐头组成，由台湾亚德客电磁阀控制，台湾亚德客气缸，并有特有的齐头撞板保护功能，由特制的锯片切断，加强了齐头的稳定性。
Controlled by Taiwan Yadeke solenoid valves, the front and rear end trimming is equipped with Taiwan Yadeke cylinders and a unique anticollision device. Boards are cut off by tailor-made saw blades to strengthen the stability of trimming.
粗修刀为15°平刀，为精修留出40-50丝的余量，采用靠模自动跟踪和高频高速电机实现快速切割。精修刀为R2斜修刀，为刮边留出5-6丝的余量，采用靠模自动跟踪和高频高速电机实现快速切割，R2斜修刀修出弧度。
The rough finish knife is a 15-degree flat knife, leaving a margin of 40-50 dmm for fine finish. By using automatic filleting and a high-frequency and high-speed motor, fast cutting can be ensured. The fine finish knife is an oblique R2, leaving a margin of 5-6 dmm for scraping. By using automatic filleting and a high-frequency and high-speed motor, the oblique R2 can shape curves.
仿形刮边，用于消除修边非直线运动的切割过程所引起次波浪痕迹，使板材上下部分更加光滑整洁，同时刮边还可以调整圆弧的大小，让封边效果更完美。
Imitation scraping is used to eliminate the wave traces caused by non-straight motion of trimming, so that the upper and lower parts of the board can be smoother while the curvature can also be adjusted to make the sealing effect perfect.
