主要技术参数
Main Technical Parameters
功能特点
Features
龙门全部经过高温淬火处理，保证不变形，主轴电机座与龙门结合处全部要求垂直打表精度达到一丝以内，垂直加工精度保证5丝以内。X/Y/Z轴的加工精度全部打表保证在5丝以内。
齿条方轨与导轨精度打表一丝，保证Y、Z轴的加工精度。导轨滑块与导轨的关键性在于，安装初期的精度要求全部由质量好的导轨、滑块决定的。假冒产品，使用出现故障出现以后，及时拆卸更换配件以后也会跟出厂时的精度没法比，而且影响整体的加工精度。
All the gantries are quenched after heated at a high temperature to ensure that they cannot be deformed. The vertical gauge precision of the joints of the principal axis motor seat and the gantry is required to be within1 dmm, and the vertical processing precision to be within 5 dmm. The processing precision of the X/Y/Z axis is guaranteed to be within 5 dmm.
The precision of the rack square rail and the lead rail is within 1 dmm to ensure the processing precision of the Y axis and Z axis. The key to high precision of the rail slider and the rail depends on the good quality of rails and sliders in the early stage of installation. The precision of counterfeit products cannot be compared with that of quality products, even though broken accessories are timely removed and replaced, lowering the overall processing precision.
